Nicole-s Risky Job May 2026

Passage (adapted) Nicole is a 28-year-old industrial rope-access technician who inspects and repairs tall communications towers and wind-turbine blades. She began training at 22, completed certifications in rope-access safety and confined-space rescue, and joined a specialist maintenance firm. Her typical workday includes a safety briefing, equipment checks, ascending by rope, performing visual and tactile inspections, replacing corroded bolts, sealing surface cracks with composite patches, and documenting findings with annotated photos. Weather windows, fatigue, and complex emergency scenarios add risk. She uses redundant anchor systems, communicates by radio with a ground team, and practices rescue drills monthly. Her employer enforces strict permits, lockout-tagout procedures, and continuous training.

Total: 100 marks

Section C — Scenario analysis and critical thinking (40 marks) Read the scenario then answer all parts. Nicole-s Risky Job

Section C 9. Prioritized hazards (example): 1) compromised backup tie-in (imminent fall risk); 2) high gusting winds (risk to stability and fall); 3) delayed ground support/limited comms (response delay); 4) dusk/low light (visibility); 5) structural defects (crack) that may worsen. Explanation: immediate personal-protection threats rank highest. 10. Action plan (concise steps): 1) Stop work immediately; secure Nicole on primary fall-arrest and transfer load from abrasive backup to a inspected secondary anchor; 2) Stanch further movement and don additional lighting; 3) Establish continuous radio check; if intermittent, attempt alternate comms (sat phone) and send one partner to descend only if safe; 4) Tag and isolate the access-hatch defect, photograph and mark for return visit; 5) Stabilize and protect the crack area — do not attempt major repairs; 6) If wind gusts exceed safe threshold or backups compromised, initiate immediate controlled descent using haul/rescue plan; 7) If ground team ETA confirmed ~40 min, maintain watch, conserve energy, and rehearse rescue; 8) If conditions worsen (loss of anchors, further abrasion, incapacitation), execute emergency rescue: deploy partner-haul and call external emergency services. 11. Incident summary (example, 106 words): During a late-season turbine inspection, a gust caused swing motion and revealed abrasion on a backup tie-in while communications with the ground team were disrupted; a 0.5 m leading-edge blade crack and a loose 40 m access-hatch bolt were also present. Immediate actions: work stopped, load transferred to inspected secondary anchor, site secured, defects documented, and ground team mobilized; no injury. Root causes: environmental (gusting winds), degraded anchor abrasion, and limited comms. Recommendations: enforce wind-speed stop-work limits, require redundant anchor inspection protocol with abrasion checks before exposure, improve out-of-area communications (satcom or portable repeater), and increase rescue-drill frequency under adverse conditions. Total: 100 marks Section C — Scenario analysis